DICOM
B-22
2. Select the server from the drop-down list to be default.
3. Click [Exit] and click [Return] in the Setup menu.
4. Press <Info> to open the Patient Info screen.
5. Click [WorkList] to enter the WorkList page.
6. The system queries intraday patients via Worklist server automatically and the patient
records will appear in the list.
B.3.4 MPPS
MPPS is used to send exam status information to the configured DICOM server. This can
acquaint other medical devices with the current exam progress and facilitate better
arrangements for patients.
After you preset the Worklist server and MPPS server(for details, please refer to
“B.1.4 DICOM Service Setting”), if the system query patient information from Worklist
server to begin exam, it will send exam status information to MPPS server of when
the exam is undergoing or ended. If the sending fails, the system resend
automatically.
The status information is described as follows:
z When you start a new exam, the system sends status information “In Progress” to
MPPS server.
z When the exam is ended, the system sends status information “Completed” to
MPPS server.
z When an exam is cancelled, the system sends status information “Discontinued”
to MPPS server.
z When an ended exam is activated, the system sends status information “In
Progress” to MPPS server.
B.3.5 Storage Commitment
Storage commitment is used to confirm whether images or structured reports are
successfully stored to the DICOM server.
Before storage commitment, you should set a default storage commitment server.
Storage commitment after sending images on iStation screen
1 Open iStation screen: press <iStation> or press <Info> and click [iStation].
2 Select an exam record (contains images) in iStation screen.
3 Click [Send To] to enter the screen.