The two different categories of power operation mode configurations in this menu are:
Configuration of power saving action when the system is
being operated without AC power applied. System will be
running off the ZS3’s internal Z-PAK battery.
Configuration of power saving action when the system
is running off AC wall power.
The two configurable Power Save behaviors offered are:
Screen display is “Blanked”, after configured time
period has elapsed (range: 1-60 minutes)
System performs a complete sequenced “Power-Down”
operation, after configured time period has elapsed
(range: 1-120 minutes)
For each of the power configurations, select the desired power saving option, and enter
the desired time interval, from the menu.
NOTE: Unchecking the “Enabled” box, for either option, disables that time-out function.
To Next Page
Loading...
Need help?
General
