6 Setup
The Setup function is designed to set the configuration parameters of operating the
system and maintaining user workflow setup data. The setup data of the user and
system are stored to the hard drive, and should be backed up to USB memory device.
To enter Setup:
Press the <Setup> key on the keyboard. The following tabs are available for
customization.
To exit Setup:
Select [Save] in the Setup menu. The parameter settings are saved.
Select [Cancel] in the Setup menu or press <ESC> to close the Setup menu.
When you change the system language and click [OK] in the Setup menu, the system
automatically shuts down to make the modification effective.
Basic operations
The commonly-used setting types are:
Text box: position the cursor over the corresponding field box. Enter the desired
value using the keyboard or soft keyboard on the soft menu.
Radio button: click the button to select an item.
Check box: click the checkbox to select one or more options.
Drop-down list: click the arrow beside the list to select an item.
System
The system automatically enters the [System] screen after you enter Setup.
To Next Page
Loading...
Need help?
General
