Mindray Zonare ZS3 Service Manual

ZS3 Service Manual Page 171 of 295
 Do not use solvents or abrasives to clean any part of the ZS3 system.
 Do not spill liquid on the ZS3 system.
 Do not immerse the battery in water or allow it to get wet.
 Do not put the battery into a microwave oven or pressurized container.
 Use only Mindray/Zonare batteries.
 Store the battery between 32F and 120F (0 and 50C).
 If the battery leaks, emits odors, emits heat, or is deformed or discolored in
any way, immediately stop using the battery.
Basic System Care
LCD Display Cleaning
WARNING: Take care not to damage or scratch the glass or LCD panel.
Do not apply pressure on the glass or LCD panel. Do not apply or spray
liquid directly to the glass, panel, or cabinet as excess liquid can cause
damage to internal electronics. Apply the liquid to the cleaning cloth.
WARNING: Do NOT use any of the following:
 Lye or cleaning solutions containing lye
 Acid
 Detergents with fluoride
 Detergents with ammonia
 Detergents with abrasives
 Steel wool
 Sponge with abrasives
 Cloth with thread made of steel
 Other coarse tools
 Do not autoclave, immerse, or attempt to sterilize the LCD display.
CAUTION: Spray cleaning solution on the cloth, NOT on the display.
1. Before cleaning, turn off the AC circuit breaker on the ZS3 system to remove all
power from the unit.
2. Clean the glass using a soft cotton cloth lightly moistened with a watery solution
or a mild commercial screen-cleaning product.
3. Wipe dry with a clean, dry, soft, lint-free cloth.
Control Panel Cleaning
 Tools: soft dry cloth, soapy water
 Method:

Mindray Zonare ZS3 Specifications

General

Brand	Mindray
Model	Zonare ZS3
Category	Diagnostic Equipment
Language	English