4001, 6000, 3001, 6555 cannot be set as the port.
IP address should be the address of the remote server.
Service Preset
The DICOM Service screen is used to set attributes of Storage, Print, WorkList, MPPS,
Storage Commitment, and Query/Retrieve, and HL7 Query.
When the system is configured with DICOM basic function module, and installed with
DICOM WorkList, MPPS, DICOM structured report, and DICOM query/retrieve modules,
the corresponding preset can be found in DICOM Service screen.
STORAGE SERVICE PRESET
1. On the DICOM Service screen, click the [Storage] page tab to enter the Storage
page.
2. Select a device from the Device drop down list and enter the corresponding AE Title,
port, etc.
3. Click [Add] to add the service to the Service List.
To Next Page
Loading...
Need help?
General
