ZS3 Service Manual Page 154 of 295
2. Restore according to exam type
Select [Exam Type] in the "Restore Imaging Presets" region to enter the "Load
Data" screen, select the data to be restored, and then the system enters the
following page:
Select a desired transducer and exam types (you can select 1 or more exam
types), and then click [Restore] to begin the restoration. (This operation requires an
automatic reboot)
3. Restore according to single preset
Select [Single Preset] in the "Restore Imaging Presets" region to enter the "Load
Data" screen, select the data to be restored, and then the system enters the
following page:
Select a desired transducer, exam type, and preset items (you can select 1 or
more user-defined preset items under only 1 exam type), and then click [Restore]
to begin the restoration. (This operation requires an automatic reboot)
Restore System
The selectable options for the “RESTORE SYSTEM” operation, and a description
of what parameters are included in each item, are listed below:
To Next Page
Loading...
Need help?
General
