Mindray Zonare ZS3 Service Manual

ZS3 Service Manual Page 249 of 295
Figure 19.40-ZS3
3. Turn the system on.
4. Attach a transducer (if not already connected)
5. Verify that the System is functioning correctly by performing a basic test. This
test is comprised of the following:
 Verify that the User Interface keys are functioning correctly by testing
each of the keys.
 Verify that the Softkey OLED displays are correct and functioning
correctly based on the selected mode.
 Verify the trackball functions correctly – testing both the horizontal and
vertical axis.
6. Once verification is complete, return system to normal operation.

Mindray Zonare ZS3 Specifications

General

Brand	Mindray
Model	Zonare ZS3
Category	Diagnostic Equipment
Language	English