115
the Manual Ctrl. switches which have the CR flag set. For details refer to the
section Node Control.
o Low Power Lamp Test – uses a Lamp test were the LEDs are not as bright and
consume less power.
o Ring telephone buzzer - check this box if the buzzer on this CPU is required
to ring for incoming calls.
o Ring buzzer on this CPU - allows users to configure (enable/disable) the
buzzer on Network masters and Rem. Annunciators.
o Print Colour - choose the colour in which log items will be printed. The
choices are black, red for alarms only or multi colour (a different colour for
Alarm, Supervisory, Monitor and Trouble). The configurator cannot verify that
the attached printer can support the selected option.
• System Messages
o Three 20 character text fields for System Normal Messages. A fixed font is
used so that the user can view the actual spacing and alignment of
characters as they will appear on the LCD. The standard text, from the
template jobs, is in the language specified in the Locale section.
• Locale
o Language - sets the language for this Annunciator. When the job is sent to
the panel, the Firmware will use the strings (menus and error messages, etc.)
for the chosen language. Any generated messages (Proving / Man Ctrl) will
be constructed using the tag of the control plus System defined tokens for
the selected language. The Main Display's chosen language becomes the
default for other Annunciators that are added to the job, but the language
does not have to be the same on all Annunciators of a job. But if languages
are mixed, they must all be supported by the same Code Page. For example,
there can be a mix of English and French displays. A mix of Eng/Arabic with
French cannot be supported, because the French accented characters and
the Arabic letters are not all on one Code Page. Note that a Main Display
cannot currently support Arabic or Hebrew. The main must either be deleted
or set to Eng/Arabic or Eng/Hebrew and hidden from the user's view.
o Time Format - choose between a fixed number of time and date formats. The
combo box shows a sample of each for the current time of day. The chosen
format will be used for all time reporting (reports, LCD display) for this
Annunciator.
To Next Page
Loading...
Need help?
General
