Mircom FX-MNS-6000 User Manual

162
037
**-**-**-ST-037 Trbl Buzzer
This status is set to TRUE if the conditions which
would cause the buzzer to sound at the trouble rate
are true.
038
**-**-**-ST-038
Alm Buzzer
Silence
This status is set to TRUE if the alarm buzzer is
currently silenced. The buzzer resounds, and the
status goes to FALSE if there is a new alarm, if the
system is reset or if the alert resound timer expires.
039
**-**-**-ST-039
Supv
Buzzer
Silence
This status is set to TRUE if the supervisory buzzer is
currently silenced. The buzzer resounds, and the
status goes to FALSE if there is a new supervisory
alarm, if the system is reset or if the alert resound
timer expires.
040
**-**-**-ST-040
Trb Buzzer
Silence
This status is set to TRUE if the trouble buzzer is
currently silenced. The buzzer resounds, and the
status goes to FALSE if there is a new trouble, if the
system is reset or if the alert resound timer expires.
041
**-**-**-ST-041
Relay Auto
Test Active
Set to TRUE when any of this job's nodes have their
"Relay Auto Test Active" status equal to TRUE.
042
**-**-**-ST-042
Ground
Fault
Set to TRUE if there is a ground fault (positive or
negative) on any of the job's nodes.
043
**-**-**-ST-043
Auto
Day/Night
This status is TRUE if the job was configured (or set
through the menu) to automatically change
between “prime time” and “after hours”
044
**-**-**-ST-044 Off Hours
This status is TRUE if the job was configured (or set
through the menu) to automatically change
between “prime time” and “after hours” and the
current system time lies within the configured after
hours times.
045
**-**-**-ST-045
Pre-alarm
active
Set to TRUE when any of this job's nodes have their
"Pre-alarm" status equal to TRUE.

Mircom FX-MNS-6000 Specifications

General

Brand	Mircom
Model	FX-MNS-6000
Category	Fire Alarms
Language	English