Mircom FX-MNS-6000 User Manual

165
009
Node
Subsequent
Alarm
Set to TRUE when any of this NODE's CPUs have their "CPU Subseq
Alarm" status equal to TRUE.
010
Node Alarm
Verif
Set to TRUE when any of this NODE's CPUs have their "Alarm Verif"
status equal to TRUE.
011
Node Wflw
Retard
Set to TRUE when any of this NODE's CPUs have their "Wflw
Retard" status equal to TRUE.
012
Node Pre-
alarm
Set to TRUE when any of this NODE's CPUs have their "Pre-alarm"
status equal to TRUE.
013
Node Maint.
Alert
Set to TRUE when any of this NODE's CPUs have their "Maint. Alert"
status equal to TRUE.
014
Node Signals
Active
Set to TRUE when any of this NODE's CPUs have their "CPU Signals
Active" status equal to TRUE.
015
Node Signal
Silence
Set to TRUE when any of this NODE's CPUs have their "CPU Sig Sil
Active" status equal to TRUE.
016
Node Ground
Fault
Set to TRUE when any of this NODE's CPUs have their "Pos Ground
Fault" or "Neg Ground Fault" status equal to TRUE.
017
Node Trbl
Xmit Activ
Set to TRUE w
hen any of this NODE's CPUs have their "CPU Trouble
Xmit" status equal to TRUE.
018
Node Relay
Auto Test
Set to TRUE when any of this NODE's CPUs have their "Relay Auto
Test Active" status equal to TRUE.
019
Node Call
Control
This status is TRUE when the Call Control switch on a Master
Telephone display adder on this Node is depressed. This status is
typically correlated to a Telephone Selector switches LED and is
used to manage calls from one master phone to another.

Mircom FX-MNS-6000 Specifications

General

Brand	Mircom
Model	FX-MNS-6000
Category	Fire Alarms
Language	English