151
CHAPTER 3 CPU MODULE FUNCTIONS
3
3.24 Error Clear
(a) Programming tool
Perform the following procedure.
*1 Descriptions of the cleared errors are not deleted from error history data.
1. On the "PLC Diagnostics" dialog box, check the
continuation errors that have been detected.
↓
2. Remove the error cause of the continuation errors.
↓
3. Select the "Continuation Error Information" radio
button and checkboxes of the errors to clear, and
click the button.
↓
4. Click "Yes" to clear the error.
5. Open the "PLC Diagnostics" dialog box and check
that the errors have been cleared.
*1
To Next Page
Loading...
