20
CHAPTER 1 BASIC PROCEDURE FOR
PROGRAMMING
This chapter describes the basic procedure for programming.
Creating programs
Create programs.
( )
Save the projects.
( )
Check column
Start
Creating projects
Create projects with GX Works2.
( )
Converting programs
Convert created programs into ones that can be
processed by the CPU module.
( )
Writing projects
Debug the programs using the monitoring function.
( )
Checking operations
End
Write the projects to the CPU module.
For the first use of the CPU module,
format the used memory beforehand.
( )
Saving projects
Page 22, Section 1.2
Page 29, Section 1.7
Page 23, Section 1.3
Page 24, Section 1.4
Page 25, Section 1.5
Page 27, Section 1.6
To Next Page
Loading...
