40
2.2.2 I/O number assignment
(1) Setting method
To assign I/O numbers, open the I/O Assignment tab. ( Page 286, Appendix 1.2)
Project window [PLC Parameter] [Parameter] [I/O Assignment]
In the I/O Assignment tab, the following settings are also available
• Response time from I/O (I/O Response Time) (
Page 94, Section 3.8)
• CPU module operation upon an error (
Page 95, Section 3.9)
• CPU module operation upon hardware failure of an intelligent function module (
Page 96, Section 3.10)
• Switch setting of intelligent function modules
To Next Page
Loading...
