25
CHAPTER 1 BASIC PROCEDURE FOR PROGRAMMING
1
1.5 Writing a Project to the CPU Module
1.5.1 Formatting a memory
1.5 Writing a Project to the CPU Module
Write the project (the program and parameters described in Section 1.4.) to the CPU module. Note that, when the
program is new, the memory ( Page 30, Section 2.1.1) is formatted so that a program can be written to it.
1.5.1 Formatting a memory
To format a memory, open the "Format PLC Memory" dialog box. In this chapter, a program memory is formatted so
that a program can be written to it.
[Online] [PLC Memory Operation] [Format PLC Memory...]
To check the capacity of the memory after formatting, open the "Online Data Operation" dialog box.
To Next Page
Loading...
