200
(2) Forced on/off registration
Specify a device (X or Y) and whether to turn on or off the specified device. The specified device and device
status are registered in a list. Devices that have already been registered can be reset. Up to 32 devices can be
registered.
Perform the following operation from the "forced on/off registration" screen.
When at least one device is registered, the MODE LED on the CPU module will be flashing in green.
"Forced on/off registration" screen
1. Switch a device using the and buttons.
↓
"Forced on/off registration" screen
2. Move the cursor using the and buttons and
increase or decrease a device number using the
and buttons.
↓
"Forced on/off registration" screen
3. Move the cursor using the and buttons and
switch on/off setting using the and buttons.
4. Pressing the button will register the setting and
will return the display to the "forced on/off" screen.
OK
To Next Page
Loading...
