Mitsubishi MELSEC-Q QD77MS

Appendix - 12
Appendices
Buffer memory address
QD77MS2
QD77MS4
QD77MS16
Compatibility
of setting value
of QD77MS2/
QD77MS4 and
QD77MS16
Item
Memory
area
30100+10n
Cd.180 Axis stop
30101+10n
Cd.181 Forward run JOG start
30102+10n
Cd.182 Reverse run JOG start
30103+10n
Cd.183 Execution prohibition flag
Expansion axis
control data
Control data
Da.1
Operation pattern
Da.2
Control system
Da.3
Acceleration time No.
6000+1000n
Da.4
Deceleration time No.
2000+6000n
Da.5
Axis to be interpolated
Positioning
identifier
2001+6000n 6001+1000n
Da.10
M code/condition data No. /Number of LOOP to
LEND repetitions
2002+6000n 6002+1000n
Da.9
Dwell time/JUMP destination positioning data No.
Da.20 Axis to be interpolated No.1
Da.21 Axis to be interpolated No.2
6003+1000n
Da.22 Axis to be interpolated No.3
Axis to be
interpolated
2004+6000n
2005+6000n
6004+1000n
6005+1000n
Da.8
Command speed
2006+6000n
2007+6000n
6006+1000n
6007+1000n
Da.6
Positioning address/movement amount
2008+6000n
2009+6000n
6008+1000n
6009+1000n
Da.7
Arc address
No.1
2010+6000n
to
2019+6000n
6010+1000n
to
6019+1000n
No.2
2020+6000n
to
2029+6000n
6020+1000n
to
6029+1000n
No.3
to to to
to
2990+6000n
to
2999+6000n
6990+1000n
to
6999+1000n
No.100
3000+6000n
to
3009+6000n
No.101
to to
to
7990+6000n
to
7999+6000n
Set with
GX Works2
No.600
Positioning data Positioning data
n: Axis No.-1
: Compatible : Partly compatible : Not compatible