T200 User's Manual SECTION 3: WIRING AND INSTALLATION
PAGE 3-62
Figure 3.35:- T200 J6 Resolver Cable
Find No. MOOG Part No. Description Quantity
B47886-001-xxx
C22297-001-xxx
•
Complete Cable Assembly 1
1 C08309-001 Signal Mating Connector
OD Cable 5,5 mm to 12 mm
(.217 in to .472 in)
Wire Gauges 0,08 mm
2
to 0.82 mm
2
(AWG 28 to AWG 18)
1
2 B47885-001
•
Bare Cable 1
3 n.a. 9 Pole Male (Plug) Sub-D:- User Supplied 1
• Refer to
Table 3.8 for detailed information
NOTE - 1. Cable Length not to exceed 90 meter (300 ft.)
2. For CE-Compliance Shield has to be attached on both sides.
Required for
CE-Compliance
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
