SECTION 2: SAFETY INSTRUCTIONS T200 User's Manual
PAGE 2-5
2.3 Safety
This user’s manual assumes that the user has a basic working knowledge of servo-drive products and the system motion
controller. The user should provide the necessary additional training for ALL personnel working within or around the
workcell.
NOTE - These safety precautions are guidelines only and are not claimed to be comprehensive.
The Moog Brushless Technology products described herein, in conjunction with the system
controller, provide the capability for control of remote devices. Typically, these remote devices
move at high speeds and exert considerable force. Like all mechanical systems and most
industrial equipment, they must be treated with respect by both the machine integrator, user and
the operator.
NOTE - This user’s guide defines “user” as the responsible person or company and “operator” as
a person who starts, stops or monitors workcell operation.
NOTE - This user’s guide should be read by all personnel who operate or who work within or
near the workcell.
Individuals responsible for the installation of the equipment described in this user’s guide must
ensure that only technically qualified service personnel are employed to work on the installation.
In the context of these safety instructions, skilled technical personnel means people who are
familiar with the product, and have the necessary technical qualifications required for the
performance of their functions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
