SECTION 1: T200 OVERVIEW T200 User's Manual
PAGE 1-7
1.4 Design Standards
The T200 has been designed to EN50178. It is CE-Marked under the EU's Low Voltage Directive. It has been designed
to allow easy compliance of customer's machines under the EU's EMC Directive (measures as directed in this manual
have to be taken to ensure EMC compliance). It is designed to the UL508C standard. T200 models –3xx, -4xx and –5xx
are UL-marked. UL is pending on the –610/710.
The T200 is considered professional equipment. Professional equipment is defined as equipment for use in trades,
professions, or industries and which is not intended for sale to the general public.
The T200 has been designed to the following specific standards:
Guidelines for engineering design EN 50178
Dimensioning of creepage distances and clearances EN 50178
Insulation coordination IEC 664
General safety requirements EN 50178
Reliable isolation EN 50178
Marking EN 50178
Grounding EN 50178
Overvoltage protection EN 50178
Ambient conditions IEC 68 Part 2-3, 2-6
Short-circuit strength EN 50178
Mechanical stresses IEC 68 Part 2-29
Protection by limitation of discharge energy EN 50178
Type-testing EN 50178
EMC EN55011
EN50082-2
UL UL508C with reference
to UL840
Table 1.2: T200 Design Standards
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
