Motorola MC40 - Page 115

Settings 7 - 13
<explanation>The amount of time that has to elapse after which the Private
Response will terminate. Decimal value in milliseconds.</explanation>
</setting>
<setting>
<te_PvtLocalPort>4080</te_PvtLocalPort>
<explanation>SIP IP Port to be used for Private Response communications.
Decimal value.</explanation>
</setting>
<setting>
<te_ipgroup>239.192.2.2</te_ipgroup>
<explanation>Multicast address to be used for Group Broadcast
communications.</explanation>
</setting>
<setting>
<te_IP_PORT_BASE>5000</te_IP_PORT_BASE>
<explanation>IP Port number of the multicast address being used for Group
Broadcast communications. Decimal value.</explanation>
</setting>
<setting>
<log_level>None</log_level>
<explanation>Log level: None, Error, Warning, Info, Debug. The default is
None.</explanation>
</setting>
<setting>
<groupCallKey>L2</groupCallKey>
<explanation>The button for group call. The default is L2.</explanation>
</setting>
<setting>
<privateCallKey>L1</privateCallKey>
<explanation>The button for private call. The default is
L1.</explanation>
</setting>