A - 2 MC40 Integrator Guide
Performance Characteristics
CPU Texas Instruments OMAP 4430 @ 800 MHz, dual-core
Operating System Android-based ASOP 2.3
Memory 1 GB RAM, 8 GB Flash
Output Power (USB) Docking Connector: 5 VDC @ 500 mA max.
User Environment
Operating Temperature 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature -40 °C to 70 °C (-40 °F to 158 °F)
Charging Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 5% to 85% RH non-condensing
Drop Specification Multiple 1.2 m (4 ft.) drops to plywood per MIL-STD 810G specifications.
Multiple 0.9 m (3 ft.) drops to tile.
Electrostatic Discharge (ESD) +/-15kVdc air discharge, +/-8kVdc direct discharge, +/-2kVdc indirect
discharge
Sealing IP54
Wireless LAN Data Communications
Wireless Local Area Network
(WLAN) radio
IEEE
®
802.11a/b/g/n with internal antenna
Data Rates Supported 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
Note that 802.11n data rates may be higher.
Operating Channels Chan 36 - 165 (5180 – 5825 MHz), Chan 1 - 13 (2412 - 2472 MHz); actual
operating channels/frequencies depend on regulatory rules and
certification agency.
Security Security Modes: Legacy, WPA and WPA2
Encryption: WEP (40 and 128 bit), TKIP and AES
Authentication: TLS, TTLS (MSCHAP), TTLS (MSCHAPV2), TTLS (PAP),
PEAP (MSCHAPV2), PEAP (GTC), FAST (MSCHAPV2), FAST (GTC),
LEAP.
Spreading Technique Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency
Division Multiplexing (OFDM)
Wireless PAN Data and Voice Communications
Bluetooth Class II, v 2.1 with EDR; integrated antenna.
Data Capture
Imager Captures 1D and 2D bar codes.
Table A-1
MC40 Technical Specifications (Continued)
Item Description