Repetitive Tone
A single tone that repeats itself
until it is terminated by the user.
Momentary Tone
Sounds only once for a duration
set by the radio.
Zone and Channel Selections
This chapter explains the operations to select a zone
or channel on your radio.
A zone is a group of channels. Your radio supports up
to 32 channels and 2 zones, with a maximum of 16
channels per zone.
Transmissions are sent and received on a channel.
Each channel may have been programmed differently
to support different groups of users or supplied with
different features.
Selecting Zones
Follow the procedure to select the required zone on
your radio.
Press the programmed Zone Toggle button.
One of the following tone sounds:
Positive Indicator Tone Radio is in Zone 2.
Negative Indicator Tone Radio is in Zone 1.
Selecting Channels
Follow the procedure to select the required channel
on your radio after you have selected a zone.
Turn the Channel Selector knob to select the
channel, subscriber ID, or group ID.
Calls
This chapter explains the operations to receive,
respond to, make, and stop calls.
You can select a subscriber alias or ID, or group alias
or ID after you have selected a channel by using one
of these features:
Programmed
One Touch
Access Button
This method is used for Group,
Private, and Phone Calls only.
Note:
You can only have one
ID assigned to a One
Touch Access button
with a short or long
102
English
To Next Page
Loading...
Need help?
General
