Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
If unsuccessful:
• A negative indicator tone sounds.
Disconnecting from Bluetooth Devices
Press the programmed Bluetooth Disconnect
button.
A positive indicator tone sounds when the device
has been disconnected.
Switching Audio Route between Internal Radio
Speaker and Bluetooth Device
Follow the procedure to toggle audio routing between
internal radio speaker and external Bluetooth device.
Press the programmed Bluetooth Audio Switch
button.
A tone sounds when the audio route has switched.
Permanent Bluetooth Discoverable Mode
Note:
The Permanent Bluetooth Discoverable Mode
must be enabled by the dealer or system
administrator.
Other Bluetooth-enabled devices can locate your
radio, but the devices cannot connect to the radio.
The Permanent Bluetooth Discoverable Mode
enables dedicated devices to use your radio position
in the process of Bluetooth-based location.
Multi-Site Controls
These features are applicable when your current
radio channel is part of an IP Site Connect or
Capacity Plus--Multi-Site configuration.
Starting Manual Site Search
Follow the procedure to start manual site search
when the received signal strength is poor in order to
attempt to find a site with better signal.
Press the programmed Manual Site Roam button.
• A tone sounds.
• The green LED blinks.
If the radio finds a new site:
111
English
To Next Page
Loading...
Need help?
General
