Once the required zone is set (if you have multiple
zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Selecting a Site
A site provides coverage for a specific area. In a
multi-site network, the Capacity Max radio will
automatically search for a new site when the signal
level from the current site drops to an unacceptable
level.
Roam Request
A Roam Request tells the radio to search for a
different site, even if the signal from the current site is
acceptable.
If there are no sites available,
• The radio continues to search through the list of
sites.
• The radio will return to the previous site, if the
previous site is still available.
Note:
This is programmed by your dealer.
Press the programmed Manual Site Roam button.
You hear a tone, indicating the radio has switched
to a new site.
Site Lock On/Off
When toggled on, the radio searches the current site
only. When toggled off, the radio searches other sites
in addition to the current site.
Press the programmed Site Lock button.
If the Site Lock function is toggled on:
• You hear a positive indicator tone, indicating
the radio has locked to the current site.
If the Site Lock function is toggled off:
• You hear a negative indicator tone, indicating
the radio is unlocked.
Site Restriction
In Capacity Max system, your radio administrator has
the ability to decide which network sites your radio is
and is not allowed to use. The radio does not have to
be reprogrammed to change the list of allowed and
disallowed sites. If your radio attempts to register at a
disallowed site, your radio receives indication that the
31
English
To Next Page
Loading...
Need help?
General
