Note:
Check with your dealer or system
administrator for more information.
Password Lock Features
This feature allows you to restrict access to the radio
by asking for a password when the device is turned
on
Accessing Radios by Using Passwords
Follow the procedure to access your radio by using a
password.
1 Enter the current four-digit password.
• Use the Channel Selector Knob to enter the
first digit of the password.
• Press Side Button 1, 2, or 3 to enter each digit
of the remaining three digits of the password.
2 Your radio automatically checks the validity of the
password.
If successful, the radio powers up.
If unsuccessful:
• You hear a continuous tone. Repeat Step 1.
• After the third attempt, your radio enters into
locked state. A tone sounds. The yellow LED
double blinks. Your radio enters into locked
state for 15 minutes.
Unlocking Radios in Locked State
Your radio is unable to receive any call, including
emergency calls, in locked state. Follow the
procedure to unlock your radio in locked state.
1 Power up the radio.
Your radio restarts the 15-minutes timer for locked
state.
2 Wait for 15 minutes.
Your radio responds only to On/Off button in
locked state.
3 Repeat the steps in Accessing Radios by Using
Passwords on page 54 to access the radio.
Over-the-Air Programming
Your dealer can remotely update your radio via Over-
the-Air Programming (OTAP) without physical
connection. Additionally, some settings can also be
configured via OTAP.
When your radio undergoes OTAP, the green LED
blinks.
54
English
To Next Page
Loading...
Need help?
General
