system administrator to determine how your
radio has been programmed.
You can turn on or turn off Wi-Fi
®
by performing the
following action.
Press the programmed Wi-Fi On or Off button.
Voice Announcement sounds Turning On Wi-Fi or
Turning Off Wi-Fi.
Connecting to a Network Access Point
Note:
This feature is applicable to XPR 7350e/XPR
7380e only. The programmed Wi-Fi Status
Query button is assigned by your dealer or
system administrator. Check with your dealer
or system administrator to determine how your
radio has been programmed.
When you turn on Wi-Fi
®
, the radio scans and
connects to a network access point.
Press the programmed Wi-Fi Status Query button for
the connection status via Voice Announcement. Voice
Announcement sounds Wi-Fi is Off, Wi-Fi is On but
No Connection, or Wi-Fi is On with Connection.
Utilities
Turning the Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts
(except for the incoming Emergency alert tone) if
needed.
Press the programmed All Tones/Alerts button.
Tone heard ... Indication
Positive Indicator tone All tones and alerts are
ON.
Negative Indicator tone All tones and alerts are
OFF.
Setting the Power Level
You can customize your radio’s power setting to high
or low for each Connect Plus zone.
High enables communication with tower sites in
Connect Plus mode located at a considerable
distance from you. Low enables communication with
tower sites in Connect Plus mode in closer proximity.
Press the programmed Power Level button.
Advanced Features in Connect Plus Mode
93
English
To Next Page
Loading...
Need help?
General
