Motorola XPR 7350 - Group Calls; Responding to Group Calls; Making Group Calls

programmable button
press.
Programmable
Button
This method is used for Phone
Calls only.
Group Calls
Your radio must be configured as part of a group to
receive a call from or make a call to the group of
users.
Responding to Group Calls
Follow the procedure to respond to Group Calls on
your radio.
When you receive a Group Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Do one of the following:
•
If the Channel Free Indication feature is
enabled, you hear a short alert tone the
moment the transmitting radio releases the
PTT button, indicating the channel is free for
you to respond. Press the PTT button to
respond to the call.
•
If the Transmit Interrupt Remote Dekey
feature is enabled, press the PTT button to
stop an ongoing interruptible call and free the
channel for you to respond.
The green LED lights up.
2 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.
Making Group Calls
Follow the procedure to make Group Calls on your
radio.
1 Do one of the following:
• Select a channel with the active group alias or
ID.
• Press the programmed One Touch Access
button.
Other Systems
103
English