press or activation of the channel selector, for a
predefined time.
Following no user activity for a programmed duration,
the radio pre-warns the user via an audio indicator
once the inactivity timer expires.
If there is still no acknowledgment by the user before
the predefined reminder timer expires, the radio
initiates an Emergency Alarm.
Only one of the following Emergency Alarms is
assigned to this feature:
• Emergency Alarm
• Emergency Alarm with Call
•
Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing
voice messages to proceed until action is taken. See
Emergency Operation on page 118 for more
information on ways to exit Emergency.
Note:
Check with your dealer or system
administrator for more information.
Password Lock Features
This feature allows you to restrict access to the radio
by asking for a password when the device is turned
on
Accessing Radios by Using Passwords
Follow the procedure to access your radio by using a
password.
1 Enter the current four-digit password.
• Use the Channel Selector Knob to enter the
first digit of the password.
• Press Side Button 1, 2, or 3 to enter each digit
of the remaining three digits of the password.
2 Your radio automatically checks the validity of the
password.
If successful, the radio powers up.
If unsuccessful:
• You hear a continuous tone. Repeat Step 1.
• After the third attempt, your radio enters into
locked state. A tone sounds. The yellow LED
double blinks. Your radio enters into locked
state for 15 minutes.
126
English
To Next Page
Loading...
Need help?
General
