2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The green LED lights up.
4 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
5 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
6 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing the
programmed Cancel button.
Making a Private Call with a One Touch Call
Button
The One Touch Call feature allows you to easily
make a Private Call to a pre-defined Private Call alias
or ID. This feature can be assigned to a short or long
programmable button press.
You can ONLY have one alias or ID assigned to a
One Touch Call button. Your radio can have multiple
One Touch Call buttons programmed.
1 Press the programmed One Touch Call button to
make a Private Call to the pre-defined Private Call
alias or ID.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.
4 Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing the
programmed Cancel button.
36
English