Negative Indicator
Tone
All tones and alerts are
turned off.
Power Levels
You can customize the power setting to high or low
for each channel.
High This enables communication with radios
located at a considerable distance from you.
Low This enables communication with radios in
closer proximity.
Setting Power Levels
Follow the procedure to set the power levels on your
radio.
Press the programmed Power Level button.
Voice Operating Transmission
The Voice Operating Transmission (VOX) allows you
to initiate a hands-free voice-activated call on a
programmed channel. The radio automatically
transmits, for a programmed period, whenever the
microphone on the VOX-capable accessory detects
voice.
Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
You can enable or disable VOX by doing one of the
following:
• Press the PTT button during radio operation to
disable VOX.
• Turn the radio off and then power it on again to
enable VOX.
• Change the channel via the Channel Selector
knob to enable VOX.
• Turn VOX on or off via the programmed VOX
button.
If the Talk Permit Tone is enabled, use a trigger word
to initiate the call. Wait for the Talk Permit Tone to
finish before speaking clearly into the microphone.
See for more information.
Note:
Turning this feature on or off is limited to
radios with this function enabled. Check with
your dealer or system administrator for more
information.
131
English
To Next Page
Loading...
Need help?
General
