system. Check with your system administrator to
determine how your radio has been programmed.
Responding to Phone Calls as Group Calls
Follow the procedure to respond to Phone Calls as
Group Calls on your radio.
When you receive a Phone Call as a Group Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
2 Release the PTT button to listen.
3 If there is no voice activity for a predetermined
period of time, the call ends.
You hear a short tone.
Note:
If Phone Call capability is not enabled in
your radio, the radio is not able to
terminate a phone call as a group call. The
telephone user must end the call. The
recipient user is only allowed to talkback
during the call.
Responding to Phone Calls as All Calls
When you receive a Phone Call as an All Call, the
receiving radio is unable to talkback or respond. The
recipient user is also not allowed to end the All Call.
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
Responding to Phone Calls as Private Calls
Follow the procedure to respond to Phone Calls as
Private Calls on your radio.
When you receive a Phone Call as a Private Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
2 Release the PTT button to listen.
3 If there is no voice activity for a predetermined
period of time, the call ends.
You hear a short tone.
39
English