each feature works do not affect the performance of
your radio.
Note:
Your radio also switches between digital and
analog modes during a dual mode scan. See
Scan on page 114 for more information.
IP Site Connect
This feature allows your radio to extend conventional
communication beyond the reach of a single site by
connecting to different available sites by using an
Internet Protocol (IP) network. This is a conventional
multi-site mode.
When the radio moves out of range from one site and
into the range of another, the radio connects to the
repeater of the new site to send or receive calls or
data transmissions. This is done either automatically
or manually depending on your settings.
In an automatic site search, the radio scans through
all available sites when the signal from the current
site is weak or when the radio is unable to detect any
signal from the current site. The radio then locks on to
the repeater with the strongest Received Signal
Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the
next site in the roam list that is currently in range but
which may not have the strongest signal and locks on
to the repeater.
Note:
Each channel can only have either Scan or
Roam enabled, not both at the same time.
Channels with this feature enabled can be added to a
particular roam list. The radio searches the channels
in the roam list during the automatic roam operation
to locate the best site. A roam list supports a
maximum of 16 channels, including the selected
channel.
Note:
You cannot manually add or delete an entry in
the roam list. Check with your dealer or
system administrator for more information.
Capacity Plus
Capacity Plus--Single Site
Capacity Plus-Single Site is a single-site trunking
configuration of the MOTOTRBO radio system, which
uses a pool of channels to support hundreds of users
and up to 254 Groups. This feature allows your radio
15
English
To Next Page
Loading...
Need help?
General
