The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds.
Making Private Calls
Your radio must be programmed for you to initiate a
Private Call. You hear a negative indicator tone when
you initiate the call when this feature is not enabled.
Follow the procedure to make Private Calls on your
radio.
1 Do one of the following:
• Select a channel with the active subscriber
alias or ID.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED blinks when the target radio
responds.
5
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period. A tone sounds.
All Calls
An All Call is a call from an individual radio to every
radio on the channel. An All Call is used to make
important announcements, requiring full attention
from the user. The users on the channel cannot
respond to an All Call.
Receiving All Calls
When you receive an All Call:
• A tone sounds.
• The green LED blinks.
105
English
To Next Page
Loading...
Need help?
General
