Note:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
The green LED lights up when the radio is
transmitting, and blinks rapidly when the radio is
receiving an ongoing privacy-enabled transmission.
Note:
Some radio models may not offer this Privacy
feature, or may have a different configuration.
Check with your dealer or system
administrator for more information.
Turning Privacy On or Off
Follow the procedure to turn privacy on or off on your
radio.
Press the programmed Privacy button.
Stun
Your radio can be disabled (stunned) or enabled
(revived) in the system from the console. For
example, you may want to disable a stolen radio to
prevent unauthorized users from using it, and enable
the radio when it is recovered.
When a radio is stunned, the radio cannot request nor
receive any user initiated services on the system that
performed the Stun procedure. However, the radio
can switch to another system. The radio continues to
send GPS location reports and can be remote
monitored when it was stunned.
Note:
Check with your dealer or system
administrator for more information.
Lone Worker
This feature prompts an emergency to be raised if
there is no user activity, such as any radio button
press or activation of the channel selector, for a
predefined time.
Following no user activity for a programmed duration,
the radio pre-warns the user via an audio indicator
once the inactivity timer expires.
If there is still no acknowledgment by the user before
the predefined reminder timer expires, the radio
initiates an emergency condition as programmed by
the dealer or system administrator.
See Emergency Operation on page 47 for more
information.
53
English
To Next Page
Loading...
Need help?
General
