• Your radio unmutes and the incoming call sounds
through the speaker.
An All Call does not wait for a predetermined period
before ending.
If the Channel Free Indication feature is enabled,
you hear a short alert tone when the transmitting
radio releases the PTT button, indicating the channel
is free for you to use. You cannot respond to an All
Call.
Note:
The radio stops receiving the All Call if you
switch to a different channel while receiving
the call. You are not able to continue with any
programmed button functions until the call
ends during an All Call.
Making All Calls
Your radio must be programmed for you to make an
All Call. Follow the procedure to make All Calls on
your radio.
1 Select a channel with the active All Call group
alias or ID.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
Users on the channel cannot respond to an All
Call.
Selective Calls
A Selective Call is a call from an individual radio to
another individual radio. It is a Private Call on an
analog system.
Responding to Selective Calls
Follow the procedure to respond to Selective Calls on
your radio.
When you receive a Selective Call:
• The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
The green LED lights up.
106
English
To Next Page
Loading...
Need help?
General
