precise location. GNSS includes Global Positioning
System (GPS), Global Navigation Satellite System
(GLONASS), and BeiDou Navigation Satellite System
(BDS).
Note:
Selected radio models may offer GPS,
GLONASS, and BDS. GNSS constellation is
configured via CPS. Check with your dealer or
system administrator to determine how your
radio has been programmed.
Do the following step to toggle GPS/GNSS on or
off on your radio.
• Press the programmed GPS/GNSS button.
Turning Radio Tones/Alerts On or Off
You can enable and disable all radio tones and alerts,
if needed, except for incoming Emergency alert tone.
Follow the procedure to turn tones and alerts on or off
on your radio.
Press the programmed All Tones/Alerts button.
One of the following tone sounds:
Positive Indicator
Tone
All tones and alerts are
turned on.
Negative Indicator
Tone
All tones and alerts are
turned off.
Power Levels
You can customize the power setting to high or low
for each channel.
High This enables communication with radios
located at a considerable distance from you.
Low This enables communication with radios in
closer proximity.
Setting Power Levels
Follow the procedure to set the power levels on your
radio.
Press the programmed Power Level button.
Turning Option Board On or Off
Option board capabilities within each channel can be
assigned to programmable buttons. Follow the
procedure to turn option board on or off on your radio.
Press the programmed Option Board button.
57
English
To Next Page
Loading...
Need help?
General
