Turning Voice Operating Transmission On or Off
Follow the procedure to turn Voice Operating
Transmission (VOX) on or off on your radio.
Press the programmed VOX button to toggle the
feature on or off.
Turning Option Board On or Off
Option board capabilities within each channel can be
assigned to programmable buttons. Follow the
procedure to turn option board on or off on your radio.
Press the programmed Option Board button.
Turning Voice Announcement On or Off
This feature enables the radio to audibly indicate the
current zone or channel the user has just assigned, or
the programmable button the user has just pressed.
This audio indicator can be customized according to
customer requirements. Follow the procedure to turn
Voice Announcement on or off on your radio.
Press the programmed Voice Announcement
button.
One of the following tone sounds:
Positive Indicator
Tone
All tones and alerts are
turned on.
Negative Indicator
Tone
All tones and alerts are
turned off.
Switching Audio Route between Internal Radio Speaker
and Wired Accessory
Follow the procedure to toggle audio routing between
internal radio speaker and wired accessory.
You can toggle audio routing between the internal
radio speaker and the speaker of a wired accessory
with the condition that:
• The wired accessory with speaker is attached.
• The audio is not routed to an external Bluetooth
accessory.
Press the programmed Audio Toggle button.
A tone sounds when the audio route has switched.
Powering down the radio or detaching the accessory
resets the audio routing to the internal radio speaker.
132
English
To Next Page
Loading...
Need help?
General
