Mic Distortion Toggles the Microphone
Dynamic Distortion Control
feature on or off.
Power Level Toggles transmit power level
between high and low.
Unassigned Indicates that the button function
has not yet been assigned.
Identifying Status Indicators in Connect Plus
Mode
LED Indicator
The LED indicator ( ) shows the operational status of
your radio.
Blinking red Battery mismatch occurs or radio is
transmitting at low battery condition,
receiving an emergency transmis-
sion or has failed the self-test upon
powering up, or has moved out of
range if radio is configured with Au-
to-Range Transponder System.
Rapidly
blinking red
Radio is receiving over-the-air file
transfer (Option Board firmware file,
Network Frequency file or Option
Board Codeplug file) or upgrading to
a new Option Board firmware file.
Additional Radio Controls in Connect Plus Mode
64
English
To Next Page
Loading...
Need help?
General
