Muting the Home Channel Reminder
When the Home Channel Reminder occurs, you can
temporarily mute the reminder.
Press the Silence Home Channel Reminder
programmable button.
Setting New Home Channels
When the Home Channel Reminder occurs, you can
set a new home channel.
Press the Reset Home Channel programmable
button to set the current channel as the new Home
Channel.
Scan Lists
Scan lists are created and assigned to individual
channels or groups. Your radio scans for voice
activity by cycling through the channel or group
sequence specified in the scan list for the current
channel or group.
Your radio can support up to 250 scan lists, with a
maximum of 16 members in a list. Each scan list
supports a mixture of both analog and digital entries.
Note:
This feature is not applicable in Capacity Plus.
Scan
Your radio cycles through the programmed scan list
for the current channel looking for voice activity when
you start a scan.
Note:
This feature is not applicable in Capacity Plus.
The LED blinks yellow.
During a dual-mode scan, if you are on a digital
channel, and your radio locks onto an analog
channel, it automatically switches from digital mode to
analog mode for the duration of the call which is also
true for the reverse.
There are two ways of initiating scan:
Main Channel
Scan (Manual)
Your radio scans all the channels
or groups in your scan list. On
entering scan, your radio may,
depending on the settings,
automatically start on the last
scanned active channel or group,
114
English
To Next Page
Loading...
Need help?
General
