Motorola XPR 7350 User Manual

2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds.
Making Selective Calls
Your radio must be programmed for you to initiate a
Selective Call. Follow the procedure to make
Selective Calls on your radio.
1 Select a channel with the active subscriber alias or
ID.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
5
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Phone Calls
Making Phone Calls
Follow the procedure to make Phone Calls on your
radio.
When you attempt to make or end a Phone Call
without the access and deaccess codes
preconfigured, the attempt fails and a negative
indicator tone sounds.
1 Press the programmed One Touch Access
button to the predefined alias or ID.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds.
If successful:
Other Systems
107
English

Motorola XPR 7350 Specifications

General

Channels	32
IP Rating	IP57
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Digital Protocol	DMR
Bluetooth	Yes (optional)
GPS	Yes (optional)
Frequency Range	VHF: 136-174 MHz
Power Output	VHF: 1-5W; UHF: 1-4W