subsequent transmissions in the
same Emergency call, you must
press the PTT button.
Emergency
Alert
An Emergency Alert is not a voice
call. It is an emergency notification
that is sent to radios that are
configured to receive these alerts.
The radio sends an emergency alert
via the control channel of the
currently registered site. The
Emergency Alert is received by
radios in the Connect Plus network
that are programmed to receive
them (no matter which network site
they are registered to).
Only one of the Emergency Modes can be assigned
to the Emergency button per zone. In addition, each
Emergency mode has the following types:
Regular Radio initiates an Emergency and
shows audio and/or visual indicators.
Silent Radio initiates an Emergency without
any audio or visual indicators. The radio
suppresses all audio or visual
indications of the Emergency until you
press the PTT button to start a voice
transmission.
Silent
with
Voice
The same as Silent operation, except
that the radio also unmutes for some
voice transmissions.
Responding to an Emergency Call
The radio does not show that it is receiving an
Emergency call. Respond the same way as you
would to group calls.
Ignore Emergency Revert Call
This feature enhancement is to provide an option for
the radio to ignore an active Emergency Revert Call.
To enable Ignore Emergency Revert Call, the radio
must be configured at the Connect Plus Customer
Programming Software (CPCPS).
When the feature is enabled, the radio does not
receive any audio on the default Emergency Revert
Group ID.
Check with your dealer or system administrator for
more information.
Advanced Features in Connect Plus Mode
83
English
To Next Page
Loading...
Need help?
General
