OnCell G3100 Series Software Installation/Configuration
You can also select Enable Auto IP Report. Refer to the MAC address on the device label and type in the
MAC address in the MAC address line to update the IP address for this mapping entry automatically
whenever the IP address of the OnCell G3100 is changed. For information on the Auto IP Report function,
please refer chapter 6.
4. COM ports and their mappings will appear in blue until they are activated. Activating the COM ports saves
the information in the host system registry and makes the COM port available for use. The host computer
will not have the ability to use the COM port until the COM ports are activated. Click Yes to activate the COM
ports at this time, or click Cancel to activate the COM ports later.
To Next Page
Loading...
Need help?
General
