AIR CONDITIONER CONTROL
MTC-27
C
D
E
F
G
H
I
K
L
M
A
B
MTC
Revision: January 2005 2004 Quest
Rear air control
DISPLAY SCREEN
Displays the operational status of the system.
TEMPERATURE DIAL (TEMPERATURE CONTROL) (FRONT)
Increases or decreases the set temperature.
TEMPERATURE DIAL (TEMPERATURE CONTROL) (REAR)
Increases or decreases the set temperature.
RECIRCULATION () SWITCH
● When REC switch is ON, REC switch indicator turns ON, and air inlet is set to REC.
● When REC switch is turned OFF, or when compressor is turned from ON to OFF, REC switch is automati-
cally turned OFF. REC mode can be re-entered by pressing REC switch again.
● REC switch is not operated when DEF switch is turned ON, or at the D/F position.
REAR WINDOW DEFOGGER SWITCH
When switch is ON, rear window is defogged.
OFF DIAL (BLOWER SPEED SET TO 0)
The compressor and blower are OFF, the intake doors are set to the outside air position, and the air outlet
doors are set to the foot (75% foot and 25% defrost) position.
A/C SWITCH
The compressor is ON or OFF.
MODE DIAL
Controls the air discharge outlets through control of the mode and defroster doors.
FRONT BLOWER CONTROL DIAL
Manually control the blower speed. Four speeds are available for manual control (as shown on the display
screen).
REAR BLOWER CONTROL DIAL
When the rear blower switch (front) is in the OFF position, the rear blower motor cannot operate.
When the rear blower switch (front) is in the REAR position, it allows the rear blower switch (rear) to control
the rear blower motor speed. In any other position (1-4), the rear blower switch (front) controls the rear blower
motor speed regardless of the rear blower switch (rear) position.
LJIA0024E
To Next Page
Loading...