7-19COPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
COPYING
AI
One-sided copying of a duplex document (2:1)
This mode allows you to convert two-sided originals into one-sided documents.
1
6
1
5
1
4
1
3
2
6
4
1 Scan the front side. 2 Turn over the document
and scan the backside.
3 The scanned data temporarily
saved in the memory will be
sorted and printed.
5
5
1
3
2
2
4
4
6
6
5
1
1
To ADF
To
ADF
NOTE:
When the power fails due to such as blackout during one-sided copying of
duplex document, see as follows:
• While sorting the scanned data:
The scanned data temporarily saved will not be saved in memory.
• When sorting the scanned data is completed:
The scanned data temporarily saved will be saved in memory.
1
Set the front side of the duplex document in the ADF.
2
Press [COPY] to display the Copy standby mode.
3
Press [Others], [DuplexCopy]*.
* If the duplex printing unit is not installed, press [DuplexScan].
NOTE: You can assign [DuplexCopy] (or [DuplexScan]) to the soft key. See “Soft keys”
on pages 10-2 to 10-6.
4
Press [2 -> 1 sided]*.
* If the duplex printing unit is not installed, press [ON].
• If you set an advanced functions proceed to step 5.
• If you do not set an advanced function, proceed to step 7.
5
Press [Advance].
To Next Page
Loading...
Need help?
General
