Muratec MFX-1430 User Manual

14-4 MAINTENANCE & TROUBLESHOOTING
To clean the charge wire
1
Open the front cover.
2
Gently pull the blue cleaning rod toward you, making sure it fully extends.
Then return the rod to its original position. This operation also cleans the print
head.
Pull the blue rod toward
you,making sure it fully
extends.
Return the rod to its
original position.
Instruction
A
1
2
3
Close the front cover.

Muratec MFX-1430 Specifications

General

Brand	Muratec
Model	MFX-1430
Category	All in One Printer
Language	English