Users Guide ValueJet 1614
106 AP-75790 Rev 1.4 -22/02/2011,
Step 7 : Press the [ENTER] key on the operation panel
Maintenance starts
The print head moves to the left.
CR Maintenance: END is displayed on the operation panel.
Step 8 : Open the left maintenance cover.
ï
N° Name
1 Maintenance cover
Step 9 : Confirm, using a light such as a penlight, that there are no foreign objects, such as dust or ink
attached to the following parts:
î îï
í ìì
N° Name
1 print head
2 Head guide area
3 Nozzle
4 Dust, ink mass
To Next Page
Loading...
