Users Guide ValueJet 1614
34 AP-75790 Rev 1.4 -22/02/2011,
3.4 DISPOSAL OF WASTE FLUIDS.
Be sure to read and understand the safety warnings before handling the printer.
(1) Disposal period.
Dispose the waste fluids in the following cases.
When the waste fluid tank is more than half full.
When Waste Ink Tank Full is displayed on the operation panel.
(2) Disposal method.
Step 1 : Prepare an empty container such as a supply waste fluid bottle, to contain the waste fluid.
Step 2 : Lay a protective material on the floor under the waste fluid tank.
Step 3 : Open the waste fluid valve, and transfer the waste fluid to the container.
Notes
When transferring the waste fluid to the empty container, put the container close to the waste fluid
valve, so it could not splash.
ï
î
N° Name
1 Waste fluid valve
2 Empty container
Step 4 : After transferring the waste fluid to the empty container, close the waste fluid valve securely.
ï
î
Step 5 : Wipe the opening of the waste fluid valve with a cloth, etc.
Disposal of waste fluids is now complete.
To Next Page
Loading...
Need help?
General