MUTOH valuejet 1614 User Manual

Users Guide ValueJet 1614
108 AP-75790  Rev 1.4 -22/02/2011,
5.2 DONE BY AUTHORIZED MUTOH TECHNICIAN
This section describes the periodical part replacement and the periodical inspections required for this printer.
These periodical services ensure the stable printing quality of the printer.
5.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements should be executed by
an authorized Mutoh technician. These replacements are necessary to ensure the best printing quality output.
Part Timing
Maintenance station Once a year
Wiper Once a year
Damper Once a year
5.2.2 Periodical inspection part list
Perform periodical inspections according to the table: Periodical Inspection Part List and perform cleaning
and part replacement as necessary.
Part Timing Check point
Media guide
Sub platen front surface
Once a year
Media dust accumulation
Foreign objects
Damages
Timing fence
(CR encoder detection slit plate)
Once a year
Media dust accumulation
Foreign objects
Damages
Rail on the CR guide frame Once a year
Foreign objects
P_REAR sensor front surface Once a year
Media dust accumulation
Foreign object

MUTOH valuejet 1614 Specifications

General

Brand	MUTOH
Model	valuejet 1614
Category	Printer
Language	English