MUTOH valuejet 1614 User Manual

Users Guide ValueJet 1614
122 AP-75790  Rev 1.4 -22/02/2011,
6.4 ERROR MESSAGES
6.4.1 Status messages
This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as below.
N° Display Description Reference
1 Ready to Print
Standby
(Media is loaded).

2 Media End
Standby
(Media is loaded).
Setting media
3 Receiving Receiving data. 
4 Converting Analyzing data. 
5 Printing Under printing. 
6 Warming Up Warming up the heater. 
7 Cleaning **% Cleaning the head. Please wait a while. Head cleaning
8 Start Ink Charge->E
Ink filling starts.
Press the [Enter] key.
Installing ink
cassettes
9 Insert cleaning cart
Washing the head.
Insert the cleaning cassette
Installing ink
cassettes
10 During washing
Washing the print head by Head washing.
Please wait a while.
"Panel setup menu"
11 Remove cassettes
Washing the head.
Insert the cleaning cassettes.
"Panel setup menu"
12 Wash retry? No
Head washing is complete
Press the [ENTER] key
Installing ink
cassettes
13 Insert ink cassette
Filling the ink.
Insert an ink cassette.
Installing ink
cassettes
14 Ink Refill **%
Filling the ink.
Please wait a while.
Installing ink
cassettes
15 Subtank refill **%
Filling the ink into the subtank
Please wait a while
Installing ink
cassettes
16 Moving Origin Pos.
The print head is moving to the original printing
position in the Origin setup menu.
Please wait a while.
"Panel setup menu"
17
Confirm Position -
>E
The print head is moving to the original printing
position in the Origin setup menu.
Press the [Enter] key.
"Panel setup menu"
19 ** Initialling **
Initializing the setting in the Initialization menu. Please
wait a while.
"Panel setup menu"
20 Media: Type ** OK?
Initializing the media. Please wait a while.
(**represents the setup media type.)
"Setting media
type"
21 Media Initial
Initializing the media.
Please wait a while.
(** represents the setup media type)
setting media
type
22 Cover open
The front cover or maintenance cover is open setting media
cleaning the
wiper
23 Mainte cover l open The left maintenance cover is open Setting media
Cleaning the wiper
Cleaning around
the printhead
24 Mainte cover R open
The right maintenance cover is open
25 Lever up The media loading lever is raised. Set the media setting media
26 Start sleep mode?
Waiting to activate sleep mode.
Press the [ENTER] key to activate sleep mode
Sleep mode menu

MUTOH valuejet 1614 Specifications

General

Brand	MUTOH
Model	valuejet 1614
Category	Printer
Language	English