MUTOH valuejet 1614 - Page 121

Users Guide ValueJet 1614
121 AP-75790  Rev 1.4 -22/02/2011,
White or black lines appear on printed media
N° Possible cause Remedy Reference
1
Are you using the
recommended
media?
Use the recommended media.
2
Is the roll media set
correctly?
Set the roll media correctly. Loading roll media
3
Is the nozzle in good
condition?
Perform Head cleaning. Head cleaning
4
Did you perform an
Alignment?
Perform Alignment. Adjust the print head
5
Did you perform a
Media feed
compensation?
Perform Media feed compensation. "Media feed
compensation"
6
Is each heater set to
the appropriate
temperature?
Set it to the appropriate temperature. "Panel setup menu"
7
Is the head height set
to High?
Return the head height to "Normal (Low)". "Head height
adjustment"
Printing lines are not straight
N° Possible cause Remedy Reference
1
Is the ink cassette
within the validity
period?
Use a new ink cassette. Replacing ink
cassettes
2
Are you using the
recommended
media?
Use the recommended media.
3
Did you perform an
Alignment?
Perform Alignment. Adjust the print
head
4
Did you perform a
Media feed
compensation?
Perform Media feed compensation. "Media feed
compensation"
Printing lines are duplicated or patchy
N° Possible cause Remedy Reference
1
Is the nozzle in good
condition?
Perform Head cleaning. Head cleaning
2
Is the head height set
to High?
Return the head height to "Normal (Low)". "Head height
adjustment"